Gavita lighting and control

Gavita Pro 1000e DE - kit

• The professional choice of lighting fixture.
• Includes a Gavita Pro 1000W 400V DE EL lamp with an output of 2100 μmol s-1.
• Covers more than 2 sq. m. with 2000μmol s-1.
• The most efficient and highest-output model on the market (efficiency class: A++)
• Compatible with the Gavita Master controller.
• Easy installation - plug and play.

Gavita Pro 1000e DE

The best lighting just got better

The new Gavita Pro e-series models are upgraded versions of Gavita's existing classic range of lighting fixtures, now also compatible with and adapted for complete lighting control via the Gavita Master controller. You can now control the light with just a few simple button presses.

Gavita Pro HPS systems are the professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic horticultural lamps, which outperform conventional lamps in spectrum, light output and efficiency during prolonged use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent and with almost imperceptible heat emission.
• Compatible with high-frequency electronic (400V) horticultural lamps, which emit 10-25% more light.
• Highly efficient - retain more than 95% of their reflective properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: Use a single knob to increase or decrease the amount of light supplied, according to the conditions or growth stages of your plants.
• A “soft” dimming system allows the emitted light to be gradually reduced, eliminating stress on the lamp when the power supplied to it is changed.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

Gavita Pro 630e SE CMH 930M – lighting kit

Gavita Pro 630e SE kit with a total power of 630 W and two 315 W CMH lamps. The 930M version has a color temperature of 3000 K and is designated for the flowering phase. Check the kit contents and installation requirements before ordering.

Gavita Pro Plus 1000W EL DE – HPS

• HPS EL DE (double-ended) lamp
• 1000W, 400V
• Socket: K12x30S
• PPFD: 2100 µMol
• Efficiency after one year of operation (about 5,000 hours) - >96%
• Designed for electronic ballasts

Gavita Pro 6/750e DE FLEX - kit

• New! The right light for your room size.
• Includes a Gavita Pro 750W 400V DE EL lamp with an output of 1500 μmol s-1.
• Illuminates more than 1.5 sq. m with 1000μmol s-1.
• Highly efficient operating range from 600 to 825W.
• Compatible with the Gavita Master controller.
• Easy installation - plug and play.

Gavita Pro 6/750e DE FLEX

The best lighting just got better

The new Gavita Pro e-series models are improved versions of Gavita's existing classic range of lighting modules, now compatible with and adapted for complete lighting control via the Gavita Master controller. You can now control the light with just a few simple button presses.

The new addition to the Pro line's e-series is the 6/750e DE FLEX module, which uses the recently developed Gavita Pro 750W DE 400V EL lamp. The lamp's operating range is 400-825W, filling the huge gap between 600 and 1000-watt lamps. We called it 6/750 DE FLEX because it is equally effective when operating at 600 watts and at 750 watts. In many cases, it is a suitable replacement for a 1000-watt ventilated module running at 825W, which can save you up to 20% on electricity. The lamp's output at 750W is 1500 μmol s-1(2μmol s-1 per watt).

Gavita Pro HPS modules are the professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic horticultural lamps that outperform conventional lamps in spectrum, light output and efficiency during prolonged use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent operation and almost imperceptible heat emission.
• Compatible with high-frequency electronic (400V) horticultural lamps that provide 10-25% greater light output.
• Highly efficient - retain more than 95% of their reflective properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: Use a single knob to increase or decrease the amount of light output according to the conditions or growth stages of your plants.
• Soft-dimming system that gradually reduces the light output, eliminating stress on the lamp when changing the power supplied to it.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

Gavita ECM1 – external contactor module

/userfiles/editor/file/Gavita_Manual_Master%20Controller%20Booster_V15-44%20FINAL%20HR.pdf

Gavita Master EL2 - controller

• Can be connected to up to 80 ballasts: two separate rooms with up to 40 ballasts in each, or just one room with up to 80 ballasts
• Option to control up to 2 other accessories (dehumidifier, heater, irrigation system, CO2 equipment) using a Gavita ECM1
• Dual temperature safety, with built-in “Autodim” and “Auto shutdown” functions
• No changes to the supplied voltage
• “Sunrise” and “Sunset” function, gradually increasing and decreasing light when the lamps turn on and off
• Displays power output as a percentage or in watts
• Calibrated temperature sensors

Gavita Master EL2 lighting controller

Using a Gavita Master controller to control Gavita e-series modules gives you maximum control, ease of use, safety, and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the power supply, and you’re ready to use your lighting system.

The controller can turn all modules connected to it on and off (the EL2 model can control two separate rooms with up to 40 ballasts in each, or just one room with up to 80 ballasts), set the desired light output level of the modules (as a percentage or absolute value), and even simulate sunrise and sunset by gradually turning the lamps on and off. 

Two of the controller’s important functions are automatic light dimming and emergency system shutdown. When the temperature in the room rises above the set parameters, this can cause serious, sometimes irreversible damage to your crop. The temperature sensor detects this and reduces the light output to maintain the safe temperature limits you have set. A warning LED on the display will alert you if this happens, and you can take steps to address the problem. If, for any reason, temperature control in your room completely fails and temperatures rise to unacceptable levels, the emergency system will shut down all equipment it controls. The controller’s alarm can be connected to your alarm system to provide immediate notification of a problem. You can connect all your e-series modules to one controller.

The model also has two outputs for the ECM1, a device that lets you turn other accessories in the room or rooms on and off (heater, fan, irrigation system, dehumidifier, CO2 system) with a load of up to 15A.

Specifications here!

Gavita Pro 600 SE Classic – kit

• For use with 600W EL lamps only
• No acoustic resonance
• Up to 8% more light from the lamp
• Efficiency after 5000 hours of operation - >95%
• System design and concept by Gavita
• Sealed (class I) with a ventilation outlet made of Gore Tex
• Microprocessor-controlled with an LED indicator for ballast status
• Professional UV-resistant wiring
• Extremely low heat output and optimal cooling

Gavita Pro 600 SE

Gavita Pro 600 is the first 240-volt electronic ballast to power professional 600W 400V EL (electronic) lamps. These lamps have the best PAR output, an improved spectrum, and the best retention of light efficiency (>95% PAR after one year of operation). The lamp is the most efficient horticultural lamp on the market and the only lamp specifically designed for electronic ballasts.

Gavita Pro 600 is available as a complete kit including a professional HortiStar HR 96 reflector, or as a separate ballast, ideally suited to the Gavita Triple Star reflector. The ballast is fully enclosed and has no cooling fan, as it emits very little heat during operation. This allows for safe and easy installation close to your lamp, which in turn reduces the amount of electromagnetic interference reaching the ballast and significantly extends its lifespan and efficiency. The kit is easy to install using two bolts.

Specifications here!

Gavita Pro 1000 DE Classic – kit

• For use only with 1000W 400V DE EL lamps
• No acoustic resonance
• Up to 8% more light from the lamp
• Efficiency after 5000 hours of operation - >95%
• System design and concept by Gavita
• Sealed (class I) with a Gore Tex ventilation outlet
• Microprocessor-controlled with an LED ballast status indicator
• Professional UV-resistant wiring
• Driver efficiency at full power - 95-96%
• Exceptionally low heat output and optimal cooling

Gavita Pro 1000 DE

Gavita Pro 1000 DE is the first 240-volt electronic ballast to power professional 1000W 400V DE EL (electronic) lamps. These lamps provide the best PAR output, an improved spectrum, and the best light efficiency retention (>95% PAR after one year of operation). The lamp is the most efficient horticultural lamp on the market and the only lamp specifically designed for electronic ballasts.

Gavita Pro 1000 is available as a complete kit including a professional HortiStar HR 96 1000 DE reflector, or as a separate ballast. The ballast is fully enclosed and has no cooling fan, as it emits exceptionally little heat during operation. This allows for safe and easy installation close to your lamp, which in turn reduces the amount of electromagnetic interference reaching the ballast and significantly extends its lifespan and efficiency. The kit is easy to install using two bolts.

Specifications here!

Gavita Master EL1 – controller

• Can be connected to up to 40 ballasts
• Dual temperature safety, with built-in “Autodim” and “Auto shutdown” functions
• No changes to the supplied voltage
• “Sunrise” and “Sunset” function with gradual brightening and dimming of the lights when switching them on and off
• Displays the power output as a percentage or in watts
• Calibrated temperature sensors

Gavita Master EL1 lighting controller

Using a Gavita Master controller to control Gavita E-Series fixtures gives you maximum control, ease of use, safety, and simple installation. Simply connect the controller cables to your fixture using the included T-splitter, set the fixtures to EXT (external control), connect the fixture and controller to the power supply, and you’re ready to use your lighting system.

The controller can switch all connected fixtures on and off (up to 40), set the desired light output level for the fixtures (as a percentage or an absolute value), and even simulate sunrise and sunset by gradually turning the lights on and off.

Two of the controller’s important features are automatic light dimming and emergency system shutdown. When the temperature in the room rises above the set limits, this can cause serious, sometimes irreversible, damage to your crop. The temperature sensor detects this and reduces the light output to keep the temperature within the safe limits you set. A warning LED on the display will alert you if this happens, so you can take action to resolve the problem. If, for any reason, temperature control in your room completely fails and temperatures rise to unacceptable levels, the system will shut down all equipment under its control. The controller’s alarm can be connected to your alarm system to notify you immediately of a problem. You can connect all your E-Series fixtures to a single controller.

Specifications here!