G-Systems

• voltage: 230V / 50Hz
• switching time: 15 min
• backup power: no
• manual switching: On - Automatic - Off

The controller maintains a constant set temperature and prevents operation below the specified minimum speed, as well as operation above the permitted maximum speed.

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

GSE Temperature and minimum speed controller 5A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 5.0A
• max. load: 1150W
   

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the output fan according to the temperature settings you have set.

Two buttons allow setting temperature and temperature hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature is reached, the fan continues to work at minimum speed or stops. When J1 is closed - ventilation continues to work at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

GSE Temperature minimum speed controller 10A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 10.0A
• max. load: 2300W

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the exhaust fan according to the temperature and humidity settings you have set.

The four buttons allow setting temperature, temperature hysteresis, humidity and humidity hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature and humidity are reached, the fan continues to work at minimum speed or stops. When J1 is closed – ventilation continues to operate at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54