G-systems

Spare Clock TG-01 for G-system timers

This is a budget clock replacement for Timer Box I.

Dimensions and technical specification:
Voltage: 230V / 50Hz
Switching time: 15min
Backup power: No
Manual switching: On- Automatic- Off

Technical data:

The controller maintains a constant set temperature and prevents operation below the specified minimum speed, as well as operation above the permitted maximum speed.

GSE Temperature and minimum speed controller 5A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 5.0A
• max. load: 1150W
   

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

GSE Temperature minimum speed controller 10A controls the speed of one or more exhaust fans used in indoor growing.

• maintains a constant temperature in the room
• creates a continuous min. speed to prevent the release of odors
• max. current: 10.0A
• max. load: 2300W

Range of settings:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the output fan according to the temperature settings you have set.

Two buttons allow setting temperature and temperature hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature is reached, the fan continues to work at minimum speed or stops. When J1 is closed - ventilation continues to work at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the exhaust fan according to the temperature and humidity settings you have set.

The four buttons allow setting temperature, temperature hysteresis, humidity and humidity hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature and humidity are reached, the fan continues to work at minimum speed or stops. When J1 is closed – ventilation continues to operate at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

Digital ventilation controller

• 2 outputs for fans - for input and output; phase controlled
• with 2 additional programmable outputs that can be set as timers or connected to sensor readings.
• LCD screen
• 1 combined (air) temperature, humidity and light sensor
• 1 waterproof temperature sensor
• Solid aluminum body
• Up to 2200W load on a single output, or 3600W in total
• Various options for setting day/night modes.
• Depending on the version - USB port for recording data on a flash drive (CSV format).
• Free slot for underpressure sensor
• 2m power cable
• 4m sensor cables, extendable to 10m
• Digital screen and 4 buttons
• Light indication for activation of the terminals


Tech. data:
dimensions: 150 x 210 x 110 mm
power supply: 230V / 50Hz
max. power: 16A / 3600W
temperature and humidity sensor: 5V; -55°C ... + 125°C; accuracy 0.5°C / ± 4.5% RH
waterproof sensor: 5V, -55°C ... + 125°C; accuracy 0.5°C
protection class: IP54

Controller of minimum and maximum temperature with hysteresis setting - setting of temperature limits. The controller keeps the temperature constant and does not allow the fans to fall below or above the set speed. Hysteresis defines temperature limits.

Ready to use, reliable, with waterproof housing, socket caps and low voltage sensor making it ideal for wet rooms. The sensor has a 4m cable that can be extended up to 50m.



Dimensions and technical data:

130x80x70mm
Designed for: 1x2300W/Bidirectional Triode Thyristor - 1x45A
Voltage: 230V / 50HZ
5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class: IP44

This LCD fan controller with built-in display and rotary knob provides very quick and easy setup and reading of all the information provided by the intake and exhaust fan controller. It displays the temperature, humidity and rpm speed of the EC suction fan. A built-in light sensor detects day/night modes. Two 5A / 230V AC outputs for supply and exhaust fan, meanwhile you also have two RJ45 EC outputs and you can choose between 0-10V or PWM signal (pulse duration modulation).

Setting range:

• Temperature: 15 - 35C° , Hysteresis 1 to 5C°
• Humidity: 0 - 100% , Hysteresis 1 to 20%
• Min. speed: off , 1 to 100%
• Max. speed: 10 to 100%
• Neg. pressure: 0 to 50%

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

Temperature, minimum-maximum speed controller with hysteresis setting.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 1x200W / TRIAC 1x16A
• Voltage: 230V 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Maximum speed: 100% to 50%
• Hysteresis: 1C° to 8C°

Temperature, Minimum speed, Humidity and Negative Pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Humidity accuracy ±4.5%RH
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Humidity: 30% to 100%
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W.V time off powered by 2000W heater. Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W Sizes and technical data: Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.