BOYU

Short description:

BubbleGen is a dual jet bubble generator with an integrated silencer that quietly and efficiently oxygenates and circulates the nutrient solution tank. It works without noisy compressor pumps and air stones, using atmospheric pressure to create an oxygen-rich stream of bubbles and nutrient solution.

BOYU HT-8300 is a heater with a thermostat for feed tanks with a volume of 300 to 350 liters, which helps you maintain the desired temperature of the nutrient solution.

• power: 300W
• suitable for containers: 300-350L
• voltage: AC230 / 115V
• frequency: 50 / 60Hz

BOYU HT-8200 is a heater with a thermostat for feed tanks with a volume of 190 to 250 liters, which helps you maintain the desired temperature of the nutrient solution.

• power: 200W
• suitable for containers: 190-250L
• voltage: AC230 / 115V
• frequency: 50 / 60Hz

BOYU HT-8100 is a heater with a thermostat for feed tanks with a volume of 130 to 190 liters, which helps you maintain the desired temperature of the nutrient solution.

• power: 100W
• suitable for containers: 130-190L
• voltage: AC230 / 115V
• frequency: 50 / 60Hz

BOYU FP-6000 submersible water pump 6000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 105W
• H max: 5.2m
• Q max: 6000L/h
• output: ⌀ 25mm
• size: 162 x 133 x 209mm

BOYU FP-5000 submersible water pump 5000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 85W
• H max: 4.5m
• Q max: 5000L/h
• output: ⌀ 25mm
• size: 162 x 133 x 209mm

BOYU FP-4000 submersible water pump 4000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 75W
• H max: 3m
• Q max: 4000L/h
• output: ⌀ 19mm
• size: 132 x 106 x 172mm

BOYU FP-3000 submersible water pump 3000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 68W
• H max: 3.5m
• Q max: 3000L/h
• output: ⌀ 19mm
• size: 132 x 106 x 172mm

BOYU FP-2000 submersible water pump 2000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 43W
• H max: 3.0m
• Q max: 2000L/h
• output: ⌀ 19mm
• size: 118 x 101 x 158mm

BOYU FP-1500 submersible water pump 1500L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 25W
• H max: 2.5m
• Q max: 1500L/h
• output: ⌀ 13mm
• size: 104 x 93 x 140mm

BOYU FP-1000 submersible water pump 1000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 16W
• H max: 1.8m
• Q max: 1000L/h
• output: ⌀ 15mm
• size: 89 x 70 x 111mm

BOYU FP-750 submersible water pump 750L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 12W
• H max: 1.5m
• Q max: 750L/h
• output: ⌀ 13mm
• size: 75 x 57 x 92mm

BOYU FP-350 submersible water pump 350L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 6W
• H max: 0.8m
• Q max: 350L/h
• output: ⌀ 13mm
• size: 69 x 54 x 82mm

BOYU FP-150 submersible water pump 150L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 2.5W
• H max: 0.6m
• Q max: 150L/h
• output: ⌀ 11mm
• size: 50 x 43 x 48mm

BOYU FP-100 submersible water pump 120L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 1.5W
• H max: 0.3m
• Q max: 120L/h
• output: ⌀ 8mm
• size: 40 x 36 x 42mm

The BOYU S-4000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 9W
• pressure: > 0.012Mpa
• output: 3.2L/min / 768L/h
• output diameter: 4 x ⌀ 4mm
• size: 206 x 149 x 96mm

The BOYU S-2000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.012Mpa
• output: 4L/min / 240L/h
• output diameter: ⌀ 2 x 4mm
• weight: 0.82kg
• size: 163 x 105 x 88mm

The BOYU S-1000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.014Mpa
• output: 4.2L/min / 252L/h
• output diameter: ⌀ 4mm
• weight: 0.5kg
• size: 138 x 80 x 59mm

The BOYU S-500 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 2.8W
• pressure: > 0.010Mpa
• output: 4L/min / 240L/h
• output diameter: ⌀ 4mm
• weight: 0.3kg
• size: 116 x 70 x 56mm

The BOYU LK-100 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping. 

• voltage: 230V, 50/60Hz
• power: 65W
• pressure: > 0.035Mpa
• output: 100L/min / 6000L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

The BOYU LK-80 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping.

• voltage: 230V, 50/60Hz
• power: 50W
• pressure: > 0.035Mpa
• output: 80L/min / 4800L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

Thе BOYU SES-10 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• output: 10L/min / 600L/h
• output diameter: ⌀ 8mm
• size: 187 x 107 x 114mm

Thе BOYU SES-20 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 15W
• pressure: > 0.02Mpa
• output: 20L/min / 1200L/h
• output diameter: ⌀ 8mm
• size: 224 x 139 x 144mm

Thе BOYU SES-30 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 25W
• pressure: > 0.025Mpa
• output: 30L/min / 1800L/h
• output diameter: ⌀ 13mm
• size: 275 x 167 x 176mm

Thе BOYU SES-40 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.   

• voltage: 230V, 50/60Hz
• power: 30W
• pressure: > 0.03Mpa
• output: 40L/min / 2400L/h
• output diameter: ⌀ 13mm
• size: 275 x 167 x 176mm

Thе BOYU SES-60 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 35W
• pressure: > 0.03Mpa
• output: 60L/min / 3600L/h
• output diameter: ⌀ 13mm
• size: 309 x 186 x 210mm

The BOYU LK-60 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping.

• voltage: 230V, 50/60Hz
• power: 40W
• pressure: > 0.03Mpa
• output: 60L/min / 3600L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

Aerating stones are the ideal solution for increasing the concentration of oxygen in the water.

Just connect to your air pump.

Stone size: Ф125 mm

Aerating stones are the ideal solution for increasing the concentration of oxygen in the water.

Just connect to your air pump.

Stone size: Ф100 mm

Aerating stones are the ideal solution for increasing the concentration of oxygen in the water.

Just connect to your air pump.

Stone size: Ф75 mm