Flexible Silencer ⌀ 250mm for reducing noise levels in ventilation systems. To be installed after the exhaust fan. Do not bend more than 90 °!

• diameter: 250mm
• length: 1m

Flexible Silencer ⌀ 150mm for reducing noise levels in ventilation systems. To be installed after the exhaust fan. Do not bend more than 90 °!

• diameter: 150mm
• length: 1m

Flexible Silencer ⌀ 125mm for reducing noise levels in ventilation systems. To be installed after the exhaust fan. Do not bend more than 90 °!

• diameter: 125mm
• length: 1m

Sturdy filter stand suitable for all sizes. Easy to adjust height and width. Height 174-240 cm, width 60-99 cm

With Easy Rollers you can quickly and easily change the height of the lamps.

• up to 10кg

400W lighting set for indoor growing. The set consists of:

• bulb / lamp: full-spectrum Sylvania GroLux SHP-TS 400W 1pc.
• ballast: magnetic Electrostart 400W 1pc.
• reflector: air-cooled LUMii AeroTube 125mm 1pc.

Note: power cord and a plug are not included!

HortiLight Led 8 Green LED Headlamp, emitting green light is designed for use in the dark - when you want to spray your plants or just check up on them.

• power supply: 3 x 1.5V AAA batteries (not included)
• 8 LEDs for strong luminous flux
• ergonomic and easy to use

The light in the green spectrum does not interrupt the photoperiod cycle of plants and allows you to work without affecting their safely development.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of the CoolTube with a large reflective surface. Use Ф150mm air ducts if you need to connect more reflectors in series

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of the CoolTube with a large reflective surface. Use Ф125mm air ducts if you need to connect more reflectors in series

Cooltube is a reflector with a cooling glass tube designed to provide even lighting to plants without the excess heat. It reduces the heat output of the lamp placed in it by up to 40% . The removal of heat takes place through a suitable air duct, which is installed on the pipe.

• Length: 49 cm
• Pipe diameter: Ф120 mm
• Suitable for 400w or 600w MH or HPS lamps
• Attached aluminum reflector provides 92% diffused light
• Includes E40 socket
• Materials: glass and aluminum

The Avenger is the premium, top of the range Adjust-A-Wings Reflector. The super reflective surface is vapour coated with molten glass, titanium dioxide and is PVD / ceramic coated creating an enormous 95-97% reflectivity. This is the most reflective and most durable reflective surface on the market and it will maintain full refection for up to 20 years.

• Area covered: 3.89m²
• Overall dimension at Widest Setting 100cm x 70cm 
• Perfect for а 1000W / two 400W / two 600W HPS / MH lamps

The Avenger is the premium, top of the range Adjust-A-Wings Reflector. The super reflective surface is vapour coated with molten glass, titanium dioxide and is PVD / ceramic coated creating an enormous 95-97% reflectivity. This is the most reflective and most durable reflective surface on the market and it will maintain full refection for up to 20 years.

• Area covered: 2.36m²
• Overall dimension at Widest Setting 70cm x 55cm 
• Perfect for a 400W / 600W HPS / MH lamp

Thr Stucco Reflector is  a low budget open reflector (natural extraction of the heat).

• made of polished aluminum
• dimensions L/W/H: 47 x 38 x 11.5cm
• ceramic socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

The Shiny Reflector is a low-budget open reflector suitable for CFL (compact fluorescent lamp).

• made of shiny polished aluminum
• dimensions L/W/H: 47 x 42 x 12cm
• ceramic socket: E40 (included)
• suitable for: 130W CFL

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps.

High-quality Miro9 material, with a reflection of 97% reflectivity.

Special plastic flanges to avoid accidents and reduce heat.

Mounting kit included.

• 600W lamp/bulb modes: 250W, 400W, 600W
• 400W lamp/bulb modes: 250W, 400W, don't dim over 400W!
• 250W lamp/bulb modes: 250W, don't dim over 250W!
• Power Lead: 2m
• Voltage: 240V
• Running Amps: 2.9A
• ​Dimensions L/W/H: 43/38/18.5cm
• Weight: 3.215kg

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital ballast that can work with both sodium (HPS) and metal halide (MH) lamps. It provides a stable and precise voltage to the lamp, creating a higher PAR/PPF emission and yet is much more energy efficient than most ballasts on the market! The ballast features "smart start" technology and a soft dimming mechanism! External control is possible with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 600W
• dimmable / 4 working modes: 250W - 400W - 600W - 660W
• generates very little heat compared to other ballasts on the market
• silent work
• Protections: full circuit protection - open / short; over temperature; over / low voltage; end of lamp life / rectification
• 5 years warranty!

Mari 600W is a high quality and long lasting product - one of the best and most selling on the market in its class. The lighting set is designed to work with HPS (sodium) and MH (metal halide) lamps.

• the set consist of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 600W
• current consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

ViparSpectra XS2000 220W is a budget high-efficiency LED grow lighting.

• power: 220W ± 3%
• footprint (in vegetation): 121.9 x 106.7cm @ 0.61m height)
• footprint (in flowering): 106.7 x 91.4cm @ 0.51m height)
• dimensions: 50.0 х 28.0 х 6.6cm
• weight: 3.49kg

58х2,5х4,5см Fluorescent lamps 75W operates at low temperature, long tube life > 10,000HRS Full range for All Applications: Blooming

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 0.4 m²
• Luminous flux: 23 000 Lm
• Energy conversion efficiency: 92 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 0.8 m²
• Luminous flux: 38 000 Lm
• Energy conversion efficiency: 95 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 1.44 m²
• Luminous flux: 51 000 Lm
• Energy conversion efficiency: 85 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

Lumatek HPS Lamp 1000W 240V is a pulse-start* sodium bulb designed to work with Lumatek 1000W 240V Controllable Ballast. It is suitable for both growth / vegetation and flowering phase. Produced using high quality ceramic arc tube technology, the lamp can operate at higher indoor temperatures, increasing power and efficiency. Pulse start technology allows faster start-up and restart times, longer lamp life and increased support at PAR / PPF level.

• for growth and flowering
• power: 1000W
• current: 10.3A
• luminous fluxt: 130 000 lm
• efficiency: 130 lm/W
• PPF: 1850 μmol/s
• efficiency: 1.85 μmol/s
• colour temperature: 2000K
• life: 24 000h
• socket: E40

Sylvania GroLux SHP-TS 400W is a full-spectrum HPS bulb / lamp suitable for both growth / vegetation and flowering phase.

• for growing and flowering
• power: 400W
• luminous flux: 58 000 lm, 128 000 Phyto-lm
• efficiency: 145 lm/W
• colour temperature: 2050 K
• life: 26 000 h
• socket: E40