Lighting

Suitable for timing on 1x600W HID ballasts or up to 6x200W CFL. 

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all Lumatek LED lighting fixtures , drivers and ballasts. Using innovative technology, this controller intelligently monitors room temperatures, daylight hours and safely controlled dimming and on/off lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W , 600W , 630W and 1000W
• compatible with all Lumatek LED drivers: 90W , 120W , 465W , 600W and 1000W
• temperature sensor for monitoring and control
• automated temperature regulation by dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

Lumatek Control Panel (HID) is a digiatl lighting controller, one of the best on the market right now, which monitors room temperatures, light timing, automation, safety control and dimming.

• controls up to 400 ballasts 
• can be connected to Lumatek dimmable ballasts 315W, 600W, 630W and 1000W
• power dimming range: 60-100%
• personalized sunrise & sunset
• safety and temperature control mechanisms
• intelligent room maintenance

G-Systems Timer Box 4x600W + Heating control panel with mechanical timer for controlling various types of lighting (LED, HPS and MH lamps), used in indoor greenhouses. The timer box allows the inclusion of heating when the lighting is not working.

• max. power: 2400 W
• 3 operating modes ( Off / Auto / Off )
• possibility of turning on heating when the lighting is off
• Clock setting: 15-minute segments

Note: The mechanical clock (China) may have a lag of 4-5% , so we recommend using the control panel with a digital timer G-Systems Timer Box IV 4x600W + heating !

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W Sizes and technical data: Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W.V time off powered by 2000W heater. Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Hager Power Panel 48x600w, 8x continu en 3x kachel/heater

Solux Master Controller Digital 1 Channel

is a smart controller designed to manage LED lighting with a 0–10V dimming protocol. It offers precise control over light cycles and intensity, ensuring optimal conditions for plant growth in greenhouses and indoor gardens.

🔌 GSE Timer Box IV is a professional lighting and heating controller designed for hydroponic and greenhouse systems. It allows simultaneous control of up to 4 600W lamps and switching on heating devices with a maximum power of up to 2300W when the lighting is off. With a built-in temperature sensor and the ability to dim the lamps, this controller provides optimal conditions for plant growth.

🔌 LUMii XLED Controller – EU Plug is a high-quality controller designed to control LED lighting with a 0-10V signal. It allows precise adjustment of photoperiod, light intensity, as well as sunrise and sunset simulation, providing optimal conditions for plant growth.