Promotions

Wire Cross Blade for portable trimmers ⌀ 40 cm. Suitable for:

• Manual Leaf Cutter ⌀ 40cm
• FERTRASO Manual trimmer ⌀ 40cm
• FERTRASO Electric trimmer ⌀ 40cm

Spare blade for Tumble Trimmer ⌀ 40 cm - 1 pc (32 cm). The product is suitable for:

• Tumble Trimmer ⌀ 45cm manual

The Spinpro cross blade is a critical component for the efficient operation of your Spinpro machine. These blades are specially designed to trim and trim the leaves of your plants quickly and efficiently, while at the same time minimizing damage to the plants themselves.

Wire Cross Blade for electric trimmer PELADORA ⌀ 60 cm. Suitable for:

• PELADORA Electric trimmer ⌀ 60cm

Wire Cross Blade for electric trimmer FERTRASO ⌀ 60 cm. Suitable for:

• FERTRASO Electric trimmer ⌀ 60cm

Maintaining a constant temperature of the nutrient solution in hydroponic systems (NFT and DWC) within optimal limits is of utmost importance for maintaining oxygen levels and protecting roots from Pythium * and other diseases.

With the Hailea HC-130A 200 - 1000 l/h chiller, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-operate digital controller
• automatic shutdown function against overheating
• for tank / aquarium with volume: 130 l

The chiller is designed to work with a water pump with a flow rate of 1000l/h ( sold separately ).

The reverse osmosis hose is a key component to any reverse osmosis system that facilitates the movement of water through the system and to your plants. This is an excellent solution for anyone who needs a reliable and long-lasting hose for their reverse osmosis system.

Vontron 100 GPD Reverse Osmosis Membrane. Productivity 380 l/24 hours. Compatible with standard domestic reverse osmosis systems. It is used as the fourth stage of water purification in home reverse osmosis systems.

Adapter (coupling) for HDPE pipe PN10

Linear disc filter type "D" with connection size 1" external thread.

Two 1/4" external thread outlets for pressure gauges.

To install pressure gauges, you need to drill holes on both outlets (1/4"). Install the pressure gauges using a 1/4" coupling.

See related products.

Filtration level - 120 mesh (130 microns)

Drip irrigation tap with water intake without rubber with locknut for multi-season drip hose 16

Discover the new generation of filtration systems with AGRO! Introducing our new development, the 3/4" size "D" type disc line filter, ideal for your garden and farming applications.

Compression Fitting Tee 25x25x25 for PE pipes.

Maximum working pressure 10 bar.

Compression Fitting Tee 20x20x20 for PE pipes.

Maximum working pressure 10 bar.

Compression Fitting Plug 25 for PE pipes.

Maximum working pressure 12.5 bar.

Compression Fitting Plug 20 for PE pipes.

Maximum working pressure 12.5 bar.

Compression Fitting Reducer 25x20 for PE pipes.

Maximum working pressure 12.5 bar.

Water Flow Meter – Water flow meter for precise flow control

Short description:

• Precision: Measures water flow in liters and gallons.
• Large LCD screen: Displays partial and total liters for complete control.
• Convenience: Connects directly to the tap or irrigation shuttle.

Milwaukee MA9069 5000 µS/cm Conductivity Solution 230ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 5000 µS/cm at 25°C
• volume: 230 ml
• for multiple calibration

The Bluelab Connect Stick is a USB flash drive that allows recording of nutrient solution measurements and wireless monitoring.

• Ability to record data taken [when used with Bluelab Connect products (sold separately)]
• Download and install Bluelab Connect software for FREE
• Monitor data and its current status via Google Docs (requires a computer with constant internet access)
• 2 years warranty

The Bluelab PeriPod M3 allows for automated maintenance of ideal pH and nutrient levels in your tank!

• 1x 120ml/min peristaltic pump for dosing pH adjustment solutions
• 2x 120ml/min peristaltic pumps for nutrient dosing
• robust housing and wall mounting option
• individual pump filling and calibration
• replaceable peristaltic pumps and tubes
• 4 m. alkali-resistant tubes for dosing pH regulator
• 2x 4m. tubes for nutrient solution dosing
• compatible with most modern growing systems, including recirculating and standard drain systems
• compatible with Bluelab Pro Controller

* Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3s.

The Bluelab pH Controller monitors and adjusts the pH levels of your nutrient solution for you!

• Automatic control and monitoring of pH in tanks up to 7600l.
• Large and easy-to-read display with green backlight
• Easy-to-navigate programming and setup menu
• Easy pH calibration using on-screen instructions
• Flashing alarms for low or high values
• Dosing interlocks to protect against overdosing
• Automatic resumption of dosing upon restart in case of power failure
• Waterproof design with wall mount option
• 4m alkali-resistant tube for dosing pH regulator
• Use with undiluted pH regulator
• Bluelab pH Probe   probe: included
• Replaceable peristaltic pump and tubing
• Warranty for the device and temperature probe: 2 years
• Bluelab pH Probe warranty   probe: 6 months

The Milwaukee MA887 is a high-quality digital refractometer specifically designed for accurate salinity measurements in marine and artificial seawater. Combining precision, speed and ease of use, this instrument is ideal for aquarists, aquaculturists and laboratories.

Good for 13mm pipe.

Compression Fitting Adapter Internal Thread 16x1/2" for PE pipes.

Maximum working pressure 12.5 bar.

Compression Fitting Adapter External Thread 20x3/4" for PE pipes.

Maximum working pressure 12.5 bar.

We have two sizes for our drip irrigation types:

F4 mm

Dropper iDrop PC compensating 4 l/h (PC - pressure compensated)

AutoPot 13mm End plug are used to cap the end of a supply line when using 13mm pipe (hosepipe).

These connectors are perfect for reducing 13mm pipe down to 6mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve or aquaPot is positioned. They provide a water tight connection unlike many other types of reduction fittings. They work in exactly the same way as the AutoPot Cross Connector 13mm to 4mm  but this fitting has one connection for 4mm pipe whereas the cross connector provides two connections for 4mm pipe.

Тhe AQUAbox Spyder offers a revolutionary self-watering solution for Grow Your Own enthusiasts. No mains water supply, pumps or timers are required. Simply connect to an existing water barrel to automatically water a 1.2sq/m area.

Positioned directly in the ground the AQUAbox Spyder is ideal for watering conventional beds or the increasingly popular raised beds. A series of capillary wicks fan out from the AQUAbox Spyder distributing water under the soil, across an area of up to 1.2sq/m.

With the AQUAvalve at its core, the AQUAbox Spyder draws on the water supply (water barrel or tank) as required by the plants, ensuring a fantastically efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level. The capillary wicks should be changed every growing season.

An effective solution for a pathogen-free solution. An essential tool for the successful gardener, useful for both hydroponics and soil.

PLANTiT Tub Outlet 19mm 3/4" suits a range of water reticulation applications in hydroponics cultivation.

• for hose: ⌀ 19mm or 3/4"

The Water Master ACO-818 with 20 outlets (300 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

The Water Master ACO-004 with 8 outlets (60 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

Scrog net 1.20m / 1000m for plant support. The price is for a 1000m-long roll.

• wide: 1.20m
• length: 1000m
• mesh size: 16 x 16cm