Vents

VENTS VK 125 355m³/h is a turbine fan that can be used for supply or exhaust in the ventilation systems of commercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

• casing made of high-quality durable plastic
• single-phase external rotor motor equipped with self-resetting overheating protection
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

VENTS VK 150 460m³/h is a turbine fan that can be used for supply or exhaust in the ventilation systems of commercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

• casing made of high-quality durable plastic
• single-phase external rotor motor equipped with self-resetting overheating protection
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

Used to connect:

• on an air duct with a fan box
• with reducer via female connector

Used to connect:

• two separate air ducts with different diameters
• two female connectors with different diameters
• female connector with air duct of different diameter

Male connector. Used to connect two separate air ducts.

The RAM Ventilation T-Connector is an extremely useful accessory for anyone working with ventilation systems. This connector is designed to improve the efficiency and control of the ventilation system by allowing you to connect multiple ventilation pipes into one common system.

VENTS VK 200 780m³/h is a turbine fan that can be used for supply or exhaust in the ventilation systems of commercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

• casing made of high-quality durable plastic
• single-phase external rotor motor equipped with self-resetting overheating protection
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

VENTS VK 315 1340m³/h is a turbine fan that can be used for supply or exhaust in the ventilation systems of commercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

• casing made of high-quality durable plastic
• single-phase external rotor motor equipped with self-resetting overheating protection
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

VENTS TT 150 (405/520m³/h) is a turbine fan that can be used for supply or exhaust in small premises such as bathrooms, kitchens, little shops, etc.

• casing made of high-quality durable plastic
• single-phase two-speed motor
• thermal overheating protection
• equipped with clamps that allow the fan to be removed for cleaning or changing the air direction, without the need for disassembly

VENTS TT PRO 150 565m³/h is a high-performance turbine fan that can be used as supply or exhaust in premises requiring high pressure, powerful air flow and low noise levels. It is the best solution for ventilation of bathrooms and kitchens and other wet rooms, as well as apartments, villas, shops, cafes, etc.

• casing made of high-quality durable plastic
• single-phase two-speed motor with low energy consumption
• thermal overheat protection to prevent motor overload
• the ball bearings of the motor guarantee 40 000 hours service life of non-stop use
• equipped with clamps that allow the fan to be removed for cleaning or changing the air direction, without the need for disassembly

VENTS TT PRO 200 1040m³/h is a high-performance turbine fan that can be used as supply or exhaust in premises requiring high pressure, powerful air flow and low noise levels. It is the best solution for ventilation of bathrooms and kitchens and other wet rooms, as well as apartments, villas, shops, cafes, etc.

• casing made of high-quality durable plastic
• single-phase two-speed motor with low energy consumption
• thermal overheat protection to prevent motor overload
• the ball bearings of the motor guarantee 40 000 hours service life of non-stop use
• equipped with clamps that allow the fan to be removed for cleaning or changing the air direction, without the need for disassembly

Used to connect two air ducts with a female connector.

VENTS TT PRO 250 1400m³/h is a high-performance turbine fan that can be used as supply or exhaust in premises requiring high pressure, powerful air flow and low noise levels. It is the best solution for ventilation of bathrooms and kitchens and other wet rooms, as well as apartments, villas, shops, cafes, etc.

• casing made of high-quality durable plastic
• single-phase two-speed motor with low energy consumption
• thermal overheat protection to prevent motor overload
• the ball bearings of the motor guarantee 40 000 hours service life of non-stop use
• equipped with clamps that allow the fan to be removed for cleaning or changing the air direction, without the need for disassembly

Vents Boost 200 is an innovative linear fan that can be used in ventilation systems requiring a powerful air flow: commercial , office and other public or industrial premises , as well as premises with high humidity . The fan is equipped with a three-speed* brush motor that ensures a smooth distribution of air flow and allows the best combination of powerful air flow , increased pressure and low noise .

• housing: plastic
• max. air flow rate: 1140 m ³ /h
• diameter: ⌀ 200mm
• ^1st speed: 82W , 0.37A , 752m ³ /h
• ^2nd speed: 101W , 0.45A , 978m ³ /h
• ^3rd speed: 113W , 0.51A , 1140m ³ /h

Note: the fan does not have a speed switch, the speed you want is set manually when you connect the power cable.

"Vents Stream 150/160" is a high performance ventilation system designed to improve air quality in residential and commercial premises.

Used to connect:

• filter with fan
• flange with reducer
• fan with reducer

VENTS TT Silent-M 150 555m³/h is a turbine fan with a specially designed sound-insulated housing that ensures silent operation with high aerodynamic characteristics. The fans from the Silent-M series are very suitable for use in the ventilation systems of various commercial and industrial premises with high requirements to noise level - libraries, conference halls, educational institutions, kindergartens, etc.

• specially designed outer casing made of polymer-coated steel
• the inner casing is covered with a 5mm layer of special heat- and sound-insulating wool
• the inner casing and the propeller are made of high quality durable plastic
• powerful air stream and high pressure
• single-phase double-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

VENTS TT Silent-M 200 1020m³/h is a turbine fan with a specially designed sound-insulated housing that ensures silent operation with high aerodynamic characteristics. The fans from the Silent-M series are very suitable for use in the ventilation systems of various commercial and industrial premises with high requirements to noise level - libraries, conference halls, educational institutions, kindergartens, etc.

• specially designed outer casing made of polymer-coated steel
• the inner casing is covered with a 5mm layer of special heat- and sound-insulating wool
• the inner casing and the propeller are made of high quality durable plastic
• powerful air stream and high pressure
• single-phase double-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

VENTS TT Silent-M 250 1400m³/h is a turbine fan with a specially designed sound-insulated housing that ensures silent operation with high aerodynamic characteristics. The fans from the Silent-M series are very suitable for use in the ventilation systems of various commercial and industrial premises with high requirements to noise level - libraries, conference halls, educational institutions, kindergartens, etc.

• specially designed outer casing made of polymer-coated steel
• the inner casing is covered with a 5mm layer of special heat- and sound-insulating wool
• the inner casing and the propeller are made of high quality durable plastic
• powerful air stream and high pressure
• single-phase double-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life designed for at least 40 000 operating hours

Vents Boost-I 200 is a powerful turbine fan with a specially designed noise-insulated housing that provides silent operation with high aerodynamic characteristics. These properties make it extremely suitable for use in the ventilation systems of various commercial and industrial premises with high noise level requirements.

• max. capacity: 1110 m ³ /h
• suitable for: libraries , conference halls , educational institutions , kindergartens , etc.
• soundproof galvanized steel housing
• thermal and noise insulation provided by special 30mm acoustic foam
• a combination of high air flow , increased pressure and low noise
• low energy consumption

Vents Boost-I 250 is a powerful turbine fan with a specially designed noise-insulated housing that provides silent operation with high aerodynamic characteristics. These properties make it extremely suitable for use in the ventilation systems of various commercial and industrial premises with high noise level requirements.

• max. capacity: 1670 m ³ /h
• suitable for: libraries , conference halls , educational institutions , kindergartens , etc.
• soundproof galvanized steel housing
• thermal and noise insulation provided by special 30mm acoustic foam
• a combination of high air flow , increased pressure and low noise
• low energy consumption

The ventilation tee is an excellent component that allows you to branch the ventilation system in a more efficient and flexible way. It is the ideal solution when you need to connect three ducts with different diameters.

Low-pressure axial fan from the VKOM series by Vents, with a steel housing and the possibility of embedding / duct mounting directly into the ventilation system. The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for use in commercial , office and other public or industrial premises
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• The fan is powered through the remote terminal box. Power supply and installation must be carried out in accordance with the manual and the terminal box connection diagram.
• diameter: ⌀ 162 mm
• max. flow rate: 180 m ³ /h

Low-pressure axial fan from the VKOM series by Vents, with a steel housing and the possibility of embedding / duct mounting directly into the ventilation system. The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for use in commercial , office and other public or industrial premises
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• The fan is powered through the remote terminal box. Power supply and installation must be carried out in accordance with the manual and the terminal box connection diagram.
• diameter: ⌀ 262 mm
• max. flow rate: 1070 m ³ /h

Low-pressure axial fan from the VKOM series by Vents, with a steel housing and the possibility of embedding / duct mounting directly into the ventilation system. The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for use in commercial , office and other public or industrial premises
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• The fan is powered through the remote terminal box. Power supply and installation must be carried out in accordance with the manual and the terminal box connection diagram.
• diameter: ⌀ 208 mm
• max. flow rate: 390 m ³ /h

The cross piece is used for connecting three air ducts to a female coupling.

Low-pressure axial fan from the VKOM series by Vents, with a steel housing and the possibility of embedding / duct mounting directly into the ventilation system. The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for use in commercial , office and other public or industrial premises
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• The fan is powered through the remote terminal box. Power supply and installation must be carried out in accordance with the manual and the terminal box connection diagram.
• diameter: ⌀ 315 mm
• max. flow rate: 1700 m ³ /h

A check valve is an automatic mechanism designed to connect two air ducts in the construction of ventilation systems. The valve is equipped with metal wings that open when there is air flow in one direction and close when the air is drawn back. When there is no air flow, the wings remain closed with the help of a spring.

• Designed for connecting 2 separate air ducts
• Prevents treated air from returning back into the room

Vents OV1 series axial fans are designed for the transfer of large air volumes at low pressure, with the possibility of wall or panel mounting. They are used for ventilation of commercial , office and other public or industrial premises . The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for wall or panel mounting
• with steel body and aluminum fins
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• diameter: ⌀ 162 mm
• max. flow rate: 180 m ³ /h

Vents OV1 series axial fans are designed for the transfer of large air volumes at low pressure, with the possibility of wall or panel mounting. They are used for ventilation of commercial , office and other public or industrial premises . The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for wall or panel mounting
• with steel body and aluminum fins
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• diameter: ⌀ 208 mm
• max. flow rate: 390 m ³ /h

Vents OV1 series axial fans are designed for the transfer of large air volumes at low pressure, with the possibility of wall or panel mounting. They are used for ventilation of commercial , office and other public or industrial premises . The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for wall or panel mounting
• with steel body and aluminum fins
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• diameter: ⌀ 262 mm
• max. flow rate: 1070 m ³ /h

Vents OV1 series axial fans are designed for the transfer of large air volumes at low pressure, with the possibility of wall or panel mounting. They are used for ventilation of commercial, office and other public or industrial premises. The fan has an asynchronous single-phase motor , with built-in thermal protection against overheating with automatic restart.

• for wall or panel mounting
• with steel body and aluminum fins
• application: combined ( suction and pressure ) ventilation system for various rooms where high airflow is required at relatively low system resistance
• diameter: ⌀ 312 mm
• max. flow rate: 1700 m ³ /h

Electric duct heater with temperature regulator or control unit.

VENTS VKF 4E 450 is a professional axial duct fan for systems requiring high air flow rates at relatively low resistance. The model is designed for direct installation in an air duct and provides a maximum flow rate of up to 4680 m³/h at a power of 250 W. The robust steel housing with polymer coating, the single-phase AC motor with ball bearings and the built-in thermal protection make it suitable for greenhouses, warehouses, production rooms and other professional ventilation installations.

VENTS RSA5E-4-M is a professional 5-speed transformer speed controller , designed to control single-phase AC fans with a maximum rated current of up to 4 A. The speed is selected using a mechanical rotary switch, and the regulation via an autotransformer ensures stable and reliable operation of the motor. The model has built-in motor protection against overheating and the ability to connect a thermostat and an air damper actuator.

VENTS RT-10 is a compact mechanical room thermostat for automatic control of fans, heating and air conditioning systems according to the room temperature. It allows setting a desired temperature in the range +10°C to +30°C , and depending on the connection method, it can turn on or off the equipment when the set temperature threshold is reached. It operates on 220–240 V / 50–60 Hz , has IP40 protection and is intended for indoor wall mounting.

VENTS TT PRO 250 P is a highly efficient two-speed duct fan with a combined axial-centrifugal (mixed-flow) turbine, designed for ventilation of rooms requiring high air flow and high static pressure . It is suitable for ventilation systems in greenhouses, grow rooms, production and commercial facilities, as well as for domestic applications. Thanks to the compact design and removable motor block, the fan is easy to install, service and clean.

VENTS OVK 4E 400 is a professional axial fan with a round mounting plate , designed for flow and suction ventilation at high air flow rates and relatively low system resistance. The model has a diameter of Ø400 mm , a maximum flow rate of 3580 m³/h , a power of 180 W and a single-phase power supply of 230 V / 50 Hz . It is suitable for wall mounting in industrial, technical, warehouse, greenhouse and other ventilation applications.

VENTS RS-1-400 is an electronic regulator for smooth speed control of single-phase fans and other adjustable AC motors . It operates at 230 V / 50–60 Hz , supports a load of up to 1.8 A and allows simultaneous on/off and speed regulation from one rotary control. It is suitable for wall mounting in a standard or special mounting box.

VENTS P...-1-300 is a series of wall switches for controlling multi-speed fans with single-phase 230 V power supply . The series mainly includes P3-1-300 for Three-speed fans . The control is step-by-step - the user selects one of the preset motor speeds, instead of adjusting the speed smoothly.