Pumps and Compressors

Wave Maker 3000 by Neptune Hydroponics is a water agitator for mixing tanks of nutrients that promotes oxygenation and prevents water degradation. Thanks to the movement and recirculation generated, it allows the continuous suspension of nutrients and prevents them from decanting.

• Power: 6W
• Output: 3000L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

Short description:

BubbleGen is a dual jet bubble generator with an integrated silencer that quietly and efficiently oxygenates and circulates the nutrient solution tank. It works without noisy compressor pumps and air stones, using atmospheric pressure to create an oxygen-rich stream of bubbles and nutrient solution.

The BOYU S-500 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 2.8W
• pressure: > 0.010Mpa
• output: 4L/min / 240L/h
• output diameter: ⌀ 4mm
• weight: 0.3kg
• size: 116 x 70 x 56mm

Wave Maker 6000 by Neptune Hydroponics is a water agitator for mixing tanks of nutrients that promotes oxygenation and prevents water degradation. Thanks to the movement and recirculation generated, it allows the continuous suspension of nutrients and prevents them from decanting.

• Power: 12W
• Output: 6000L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

The BOYU S-1000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.014Mpa
• output: 4.2L/min / 252L/h
• output diameter: ⌀ 4mm
• weight: 0.5kg
• size: 138 x 80 x 59mm

Sicce VOYAGER 4 6000L/h is a submersible stream pump which by simulating a wave motion increases water circulation in the feed tank and prevents precipitation of dissolved nutrients. Thanks to the reliable magnetic support, the pump can be placed in any part of the tank. The possibility to rotate the support in 360°, practically allows you to direct it in any direction you want.

• flow: 6000L/h
• power: 14W
• suitable for tanks with volume: 400-730L
• silent
• self cleaning impeller
• strong magnet mount
• wide and gentle flow
• 3 years warranty

The BOYU S-2000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.012Mpa
• output: 4L/min / 240L/h
• output diameter: ⌀ 2 x 4mm
• weight: 0.82kg
• size: 163 x 105 x 88mm

Sicce VOYAGER HP7 10500L/h is a submersible stream pump which by simulating a wave motion increases water circulation in the feed tank and prevents precipitation of dissolved nutrients. Thanks to the reliable magnetic support, the pump can be placed in any part of the tank. The possibility to rotate the support in 360°, practically allows you to direct it in any direction you want.

• flow: 10500L/h
• power: 17W
• suitable for tanks with volume: 700-1200L
• silent
• self cleaning impeller
• strong magnet mount
• wide and gentle flow
• 3 years warranty

The BOYU S-4000 is a high polymer composite rubber air pump for long working life and reliability. It features low noise, generous air capacity and does not require oil lubrication. It also has electronic control of input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 9W
• pressure: > 0.012Mpa
• output: 3.2L/min / 768L/h
• output diameter: 4 x ⌀ 4mm
• size: 206 x 149 x 96mm

The Water Master ACO-001 with 6 outlets (20 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

Thе BOYU SES-10 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• output: 10L/min / 600L/h
• output diameter: ⌀ 8mm
• size: 187 x 107 x 114mm

The Water Master ACO-002 with 6 outlets (40 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

Thе BOYU SES-20 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 15W
• pressure: > 0.02Mpa
• output: 20L/min / 1200L/h
• output diameter: ⌀ 8mm
• size: 224 x 139 x 144mm

BOYU FP-100 submersible water pump 120L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 1.5W
• H max: 0.3m
• Q max: 120L/h
• output: ⌀ 8mm
• size: 40 x 36 x 42mm

The Water Master ACO-004 with 8 outlets (60 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

Thе BOYU SES-30 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 25W
• pressure: > 0.025Mpa
• output: 30L/min / 1800L/h
• output diameter: ⌀ 13mm
• size: 275 x 167 x 176mm

BOYU FP-150 submersible water pump 150L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 2.5W
• H max: 0.6m
• Q max: 150L/h
• output: ⌀ 11mm
• size: 50 x 43 x 48mm

The Water Master ACO-818 with 20 outlets (300 l/min) is an air compressor with an advanced compression system and extremely quiet operation levels. It contains a special synthetic rubber to keep the production and air pressure constant over time. Its design is small and compact, which ensures a long life with minimal energy consumption.

• extremely quiet
• constant air pressure
• small and compact
• long-term use
• energy efficient

Thе BOYU SES-40 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.   

• voltage: 230V, 50/60Hz
• power: 30W
• pressure: > 0.03Mpa
• output: 40L/min / 2400L/h
• output diameter: ⌀ 13mm
• size: 275 x 167 x 176mm

Thе BOYU SES-60 Air Pump is especially designed for quiet running. It has an aluminum casing for the motor, good heat dissipation and a long life. The air pump features big air flow and high air pressure. It is suitable for breeding, seafood market and restaurants for fish keeping.  

• voltage: 230V, 50/60Hz
• power: 35W
• pressure: > 0.03Mpa
• output: 60L/min / 3600L/h
• output diameter: ⌀ 13mm
• size: 309 x 186 x 210mm

BOYU FP-750 submersible water pump 750L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 12W
• H max: 1.5m
• Q max: 750L/h
• output: ⌀ 13mm
• size: 75 x 57 x 92mm

The BOYU LK-60 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping.

• voltage: 230V, 50/60Hz
• power: 40W
• pressure: > 0.03Mpa
• output: 60L/min / 3600L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

The BOYU LK-80 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping.

• voltage: 230V, 50/60Hz
• power: 50W
• pressure: > 0.035Mpa
• output: 80L/min / 4800L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

The BOYU LK-100 Air Pump is especially designed for quiet running, just like every SES air pump. The only difference is that the LK model has bigger air flow and higher air pressure. It has an aluminum casing for the motor, good heat dissipation and a long life. It is suitable for breeding, seafood market and restaurants for fish keeping. 

• voltage: 230V, 50/60Hz
• power: 65W
• pressure: > 0.035Mpa
• output: 100L/min / 6000L/h
• output diameter: ⌀ 19mm
• size: 288 x 196 x 193mm

BOYU FP-1000 submersible water pump 1000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 16W
• H max: 1.8m
• Q max: 1000L/h
• output: ⌀ 15mm
• size: 89 x 70 x 111mm

Quiet and energy-efficient Hailea ACO-9601 air pump with a flow rate of up to 3.2 L/min (192 L/h), adjustable flow and single outlet — ideal for small aquariums and hydroponic systems.

BOYU FP-1500 submersible water pump 1500L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 25W
• H max: 2.5m
• Q max: 1500L/h
• output: ⌀ 13mm
• size: 104 x 93 x 140mm

• Quiet, adjustable Hailea ACO-9602 air pump with a flow rate of up to 7.2 L/min (432 L/h) and 2 outputs - ideal for aerating tanks, aquariums and hydroponic systems.

Adjustable and quiet Hailea ACO-9630 air pump with a flow rate of up to 16 L/min (960 L/h) and 8 outputs - ideal for aerating tanks, hydroponic systems and aquariums.

BOYU FP-2000 submersible water pump 2000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 43W
• H max: 3.0m
• Q max: 2000L/h
• output: ⌀ 19mm
• size: 118 x 101 x 158mm

Quiet and powerful Hailea ACO-9820 air pump, providing up to 60 L/min (3,600 L/h) through 10 outputs, with soundproof construction and waterproof housing.

Reliable and quiet Hailea ACO-9820 air pump with a capacity of up to 60 L/min (3,600 L/h), 10 outputs and soundproof design - for effective aeration of aquariums, ponds and hydroponic systems.

BOYU FP-3000 submersible water pump 3000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 68W
• H max: 3.5m
• Q max: 3000L/h
• output: ⌀ 19mm
• size: 132 x 106 x 172mm

Plastic air and water manifold with 8 outlets

Power input: 8mm

Outputs: 8x4mm.

Suitable for hydroponic systems, distribution of aeration stones and aquariums.

Outer diameter of inlet: 9mm

Outer diameter of the outlet holes: 4mm

BOYU FP-4000 submersible water pump 4000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 75W
• H max: 3m
• Q max: 4000L/h
• output: ⌀ 19mm
• size: 132 x 106 x 172mm

External diameter of the inlet hole - 9 mm

Outer diameter of the outlet holes - 4 mm

BOYU FP-5000 submersible water pump 5000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 85W
• H max: 4.5m
• Q max: 5000L/h
• output: ⌀ 25mm
• size: 162 x 133 x 209mm

Outer diameter of inlet: 13mm

Outer diameter of the outlet holes: 6mm

BOYU FP-6000 submersible water pump 6000L/h is suitable for all hydroponc systems. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.

• voltage: 230V, 50/60Hz
• power: 105W
• H max: 5.2m
• Q max: 6000L/h
• output: ⌀ 25mm
• size: 162 x 133 x 209mm

Outer diameter of inlet: 9mm

Outer diameter of the outlet holes: 4mm

AquaKing Q2001 is a drainage pump with a flat suction up to approximately 2 mm . With its capacity of 2800 l/h and a power of 80W , this pump offers powerful performance for fast and efficient pumping of water . Suitable for draining basements , flooded areas , small swimming pools and aquariums . The pump is designed for clean water without solid particles larger than 2 mm.

• capacity: 2800 l/h
• power: 80W
• flat suction: up to 2 mm (minimum amount of water)
• max. water column: 2 m.
• connection : 3/4" external thread ( adapter included )
• suitable for clean water: no solids larger than 2 mm
• IPX8 rating: protected against water ingress
• voltage: 230V
• frequency: 50Hz
• power cable: 3 m

Compact and efficient Hailea HX-800 submersible pump with adjustable flow rate up to 285 l/h and maximum head of about 0.5 m - suitable for aquariums, hydroponics and small circulations.

Small and versatile Hailea HX-1500 submersible pump with a flow rate of up to 400 l/h, adjustable flow and the ability to operate at low water levels - ideal for hydroponics, tanks and circulations.

Submersible water pump aeration Submersible aerating water pump shaft of stainless steel , resistant to all fertilizer solutions, even seawater . High quality ABS plastic housing . Suitable for tank 30 -80L. Flow : 650L / h Visochnina of water column : 1,3 m Power : 12W Input: 220 -240V 50Hz Outlet diameter : 14,5 mm includes a mixer for aeration of the solution designed for continuous use works well with low levels of water in the tank No built-in flow regulator apply for NFT and Flood-and-Drain suction cups for secure attachment to the tank

Compact and efficient submersible pump Hailea HX-4500 with a flow rate of up to 2,000 l/h and a head of up to 2.8 m - suitable for ponds, fountains, feeding and circulation systems. Includes a mixer for aerating the solution designed for continuous use works well with a low water level in the tank built-in flow regulator applicable for NFT and Flood-and-Drain suction cups for secure attachment to the tank

Flexible and transparent silicone hose Ø 4 mm, supplied in a 200 m roll - ideal for air systems in aquariums, hydroponics and other low pressure applications.

Compact and reliable submersible pump Hailea HX-8810 with a flow rate of ~ 1,050 l/h and good head, suitable for ponds, small fountains, circulation and hydroponic systems.

Compact and efficient submersible pump Hailea HX-8830 with a flow rate of 2,900 l/h and a maximum head of ~2.3 m - ideal for ponds, fountains and circulations. Water pump for installation in or outside the tank High-quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to any solutions. Suitable for 200-300L tanks. Flow rate: 2900L/h Water column height: 2.3m Power: 45W Input voltage: 220-240V 50Hz Outlet diameter: 25mm designed for long-term use detachable filter - allows use in or outside the tank double water-cooled design for rapid heat dissipation applicable to all hydroponics needs - pumping, aeration, NFT, filtration suction cups for secure attachment to the tank

Reliable and versatile Hailea HX-8860 submersible pump with a flow rate of 5,800 l/h and a maximum head of about 4.1–4.2 m — for ponds, fountain systems and circulations. Water pump for installation in or outside the tank High-quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to any solutions. Suitable for tanks of about 400L and drip systems. Flow rate: 5800L/h Water column height: 4.1m Power: 130W Input voltage: 220-240V 50Hz Outlet diameter: 25mm designed for long-term use detachable filter - allows use in or out of the tank double water-cooled design for rapid heat dissipation applicable to all hydroponics needs - pumping, aeration, NFT, filtration suction cups for secure attachment to the tank

Multifunctional submersible/external pump Hailea HX-8890 with a flow rate of up to 8,000 l/h and a maximum head of 5 m - suitable for ponds, fountains, circulations and hydroponic systems. High-quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to all solutions. Suitable for high-pressure systems. Flow rate: 8000L/h Water column height: 5.0m Power: 200W Input voltage: 220-240V 50Hz Outlet diameter: 32mm designed for long-term use detachable filter - allows use in or out of the tank double water-cooled design for rapid heat dissipation applicable to all hydroponic needs - pumping, aeration, NFT, filtration suction cups for secure attachment to the tank